Press Center

Share this page on :

Your media collection

0 Items / 0 MB
With download you recognize and accept the terms of use of ZF Friedrichshafen AG.
Delete Download the content as ZIP archive
0 Item(s) / 0 MB

Back to Top

Press Release

ZF Electric Drive Solutions Simplify Transition to E-Mobility for Truck and Bus Manufacturers

  • System solutions from ZF simplify the transition to electric-powered city buses
  • The AxTrax AVE electric portal axle and the CeTrax electric central drive are compatible with all city bus variants
  • Existing distributor truck platforms can also be run electrically with the CeTrax central drive
  • TraXon Hybrid covers truck applications and helps the environment

Hanover/Friedrichshafen. In order to make the transition to local zero-emission city buses and low-emission logistic transport trucks as easy and flexible as possible, ZF is providing commercial vehicle manufacturers with technology and systems expertise. For example, the company is offering its proven AxTrax AVE electric portal axle and the new CeTrax electric central drive for city buses, acting as a one-stop shop for all the components required. This means manufacturers can choose conventional low-floor and high-floor platforms as well as low-entry buses for electrically powered models, which makes the electrification of vehicle fleets more economical and convenient. In long-haul transport logistics, electric drives are no longer limited to being a fanciful idea; in fact, the hybrid version of the ZF TraXon commercial vehicle transmission exhausts previously unused power savings potential at maximum output.

ZF Electric Drive Solutions Simplify Transition to  E-Mobility for Truck and Bus Manufacturers

Stricter emissions limits and the public debate on fine dust pollution are putting pressure not just on the passenger car manufacturers, but also on public transport operators, which are obligated to reduce emissions. This means bus manufacturers are investing resources on system integration and even more on development.

As a leading global technology company, ZF provides OEMs with expertise during this transition. Its new prototype bus impressively demonstrates what the company can offer. The 18-meter articulated bus is equipped with two of the proven AxTrax AVE electric portal axles, with a total of four motors providing powerful thrust. ZF offers this axle in a more complete package, which includes advanced inverters, drive control and full power electronics all fully integrated. The company thus guarantees optimal energy efficiency – and a larger range. For sufficient power, a standard articulated bus only needs one driven AxTrax AVE electric portal axle.

In principle, the installation space required for the AxTrax AVE is about the same as that of a conventional portal axle. For manufacturers, this means major cost savings because they do not have to develop their own chassis platforms for electric mobility solutions. The electric portal axle can be combined with most conventional power source, including batteries, supercaps, fuel cells or even overhead lines. It is also very suitable for serial hybrid and plug-in versions. This gives OEMs and public transport operators flexibility when selecting the power supply. Thanks to standardized high-volume components, its maintenance-friendliness rounds off the overall package for the future of the city bus, which ZF has created with its AxTrax AVE electric low-floor portal axle.

“Plug-and-Drive” with CeTrax

In addition to the proven AxTrax AVE, ZF offers the new electric CeTrax central drive as a system solution for low-floor and high-floor buses. CeTrax is built on a plug-and-drive approach, so it can be integrated into existing vehicle platforms without having to make major changes to the chassis, axles, statics or differential. ZF is therefore turning to manufacturers that plan to switch from existing conventional models to electrically powered models as part of their platform strategy. CeTrax is configured with a maximum output of up to 300 kW and a maximum torque of 4,400 Newton meters. It is intended above all for challenging bus applications and offers considerable weight advantages as well as outstanding efficiency. Since the delivery scope of the system package also covers drive control and inverters, manufacturers get an optimally fine-tuned total solution when it comes to performance, efficiency and service life. OEMs can also save time and money because ZF also handles the homologation and testing of the drive system. Apart from being used in buses, CeTrax is also suitable for the electrification of distributor trucks.

TraXon Hybrid: Parallel hybrid for long-haul transport logistics

The TraXon Hybrid, equipped with an electric motor positioned between the combustion engine and the transmission, allows hybrid functions in heavy commercial vehicles. One feature particularly attractive for many applications is that in generator mode, the hybrid module can also supply power to other units, such as during refrigerated transports. In addition to being installed in trucks, the TraXon Hybrid is also ideal for coaches, where the hybrid drive can offer the same advantages. Even with this innovative product, ZF offers its system solution with all the mentioned benefits. Starting in 2019, ZF will deliver TraXon Hybrid transmissions to its customer DAF.

Media

Press Release
ZF Electric Drive Solutions Simplify Transition to  E-Mobility for Truck and Bus Manufacturers
Press Release
19/09/2018
Image
Proven expertise: AxTrax AVE
Image
19/09/2018
System solutions from ZF simplify the transition to electric-powered commercial vehicles
Image
19/09/2018
Full speed ahead with AxTrax AVE
Image
19/09/2018
Electric Central Drive CeTrax
Image
19/09/2018
TraXon Hybrid
Image
19/09/2018

Press contact

Frank Discher
Frank Discher
Technology and Product Communications
Robert Buchmeier
Robert Buchmeier
Head of Technology and Product Communications